ConsoleSource.com Blog

Team Cyclops has just released another new software upgrade for the CycloWiz Wii Mod Chip. This upgrade is similar to the v3.0 upgrade with the exception that this upgrade is now compatible with D2B chipsets. You can download the CycloWiz v3.0b upgrade here.

Quote:

First of all, we received two new Wii consoles for testing, one from Japan and one from Hong Kong. Both have the new drive revision that was spotted in Taiwan last week. Guess what, while the drive PCB is different, CycloWiz has been tested and is 100% compatible with the new boards ! Not only is it working as usual, but it is possible to install it using quick-solder method, as the alignement of the points didn’t change. While CycloWiz works fine, this is not the case for some other mods for which a wire needs to be soldered directly to a chip’s leg because they use an extra solder point that has now been removed.

We also added upgrade 3.0B to the download section. It’s similar as 3.0 except that it’s now compatible with D2B chipset. Users that already upgraded to 3.0 do not need to upgrade.

Make sure to read the Upgrade 3.0B README file before flashing your chip!

Quote: Team Cyclops

Did you know that by joining the ConsoleSource.com mailing list you will be sent special offers and coupon codes on a regular basis in the form of our eNews Newsletter. All of this in addition to product updates and scene news delivered directly your email Inbox. Check out our most recent eNews Newsletter for a coupon code entitling you to $5 off of your next order at ConsoleSource.com.

The WiiD Mod Chip firmware has been released and made available for download here. This firmware when used in conjunction with your WiiD Mod Chip will add region free capabilities to your Wii.

The latest Nintendo Wii Mod Chip to enter the scene is now in stock at ConsoleSource.com. The WiiD Mod Chip is a fully featured Nintendo Wii mod, easy to install, easy to upgrade, compatible with every single Wii console system. Ideal for Wii advanced users. More features to be added in future with software upgrades. Order the WiiD Wii Mod Chip today for only $39.95.

Quote:

• Non Swap/Direct Boot for Wii backups
• Non Swap/Direct Boot for GC backups
• Non Swap/Direct Boot for Homebrew in GC mode
• Non Swap/Direct Boot for NTSC region Wii games/backups on US and JAP consoles
• Boots PAL Backups/Originals on NTSC WII consoles (partially without swapping)
• Boots NTSC Backups/Originals on PAL WII consoles (partially without swapping)
• Boots different region GC Games Original/Backups Imports (partially without swapping)
• EUROPE/USA/JAPAN Wii Console Supported
• Double soldering option, 6 wires or Quicksolder (No wires Required)
• Compatible with all the WII Console Versions/Drive currently available
• Full D2B Drive Support
• Built-in audio fix
• Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
• Supports Multi-Disc/Multigames games for BOTH Wii and Gamecube
• Recovery Mode for incomplete/Bad Upgrades
• Stealth mode
• Firmware fully Upgradable by DVD

Source: Team WiiD

If you want to a a truly custom look to our Nintendo Wii then you need to check out the new I-Case Replacement Wii Cases from the XCM Team. In stock now the XCM I-Case Black Knight Wii Replacement Case is sure to impress your friends and more importantly it is a breeze to install. Each I-Case comes complete with a special Tri-Wing scredriver for disassembling your Wii as well as a color matched stand all for the low price of $39.95.

Quote:

The XCM I-Case is a full replacement case for the Nintendo Wii. This easy to install case mod will have your Nintendo Wii looking totally customized. The I-Case is constructed form the same high quality plastics as the original Wii case. This package also includes matching color stand and special Tri-wing screwdriver for installation.

The hottest Nintendo DS Backup Unit is back in stock at ConsoleSource.com. We will be shipping all existing pre-orders for the M3 DS Simply today and Monday with plenty of stock remaining for regular purchases. Order the M3 DS Simply today from ConsoleSource.com.

We have just reduced the price of the CycloWiz Nintendo Universal Wii Mod Chip by $5.00. The CycloWiz Wii Mod Chip has been updated to be universally compatible with all current Wii drive chipsets including DMS, D2A and D2B. Order your CycloWiz Universal Wii Mod Chip today for $34.95.

It has come to our attention that some sites are offering clone / fake WiiKey Mod Chips for sale. These cloned chips will not function the same as the original WiiKey Mod Chip. If you have already purchased or are considering purchasing from ConsoleSource.com you can rest assured that we ONLY sell the official WiiKey Mod Chip.

To verify that you have received an official WiiKey Mod Chip from your reseller click here to take a look at the clone / fake identification guide.

If you are looking to make a backup copy of your Nintendo Wii or GameCube game disc then the LG GDR-8164B DVD-ROM drive is the only drive on the market that will get the job done. ConsoleSource.com has just added the LG GDR-8164B DVD-ROM drive in Black drive to its inventory at a retail price of $39.99. Also checkout the “How to backup Wii Games tutorial” which was just posted in our Knowledgebase.

Team Cyclops has released the first ever upgrade for the CycloWiz Mod Chip. This upgrade is only for systems with the DMS and D2A chipsets. A subsequent build of the upgrade will be released shortly for D2B chipsets. An extensive online tutorial for installing the upgrade has been made available at Maxconsole.net.

Now that availability of the WiiKey and CycloWiz has stabilized we are able to offer wholesale pricing on both of these hot Wii Mod Chips. You can now purchase 25pcs of WiiKey Wii Mod Chip for $32.95ea and 25pcs of CycloWiz Wii Mod Chip for $33.95ea. We have plenty of stock and do not expect any future shortages of either the WiiKey or the CycloWiz.

ConsoleSource.com still has plenty of the WiiKey Mod Chip in stock for only $39.95 each. If you still have not ordered your WiiKey Mod Chip then order today and start playing imports and backups on your Nintendo Wii.

The hottest Nintendo DS backup unit on the market today just got a whole lot more affordable. We have just reduced the price of the R4 Slot-1 All-In-One NDS Lite Backup Solution to $39.95 and the R4 Slot-1 All-In-One w/ 1GB Micro SD Card to $69.95.

Team Xeno’s answer to Team Xecuter’s Blaster 360 known as Xeno Top Gear for Xbox 360 will begin shipping on March 20, 2007. The Xeno Top Gear is an external switching device when, once fitted, allows you to flash your DVD Firmware without ever having to open up your Xbox 360 case ever again. The installation of the Xeno Top Gear is a breeze. Take a look at the installation manual here.

The Xeno Top Gear is available for order today at ConsoleSource.com for $44.99 - ORDER NOW

Quote:

• After the easy one time only installation, flash your Xbox360 without
  the need to open it ever again.
• Works with all Xbox360 drives that can be firmware-upgraded.
• High Quality digital Sata exchange switching
• No soldering required at all = no chance to brick your drive from bad
  soldering.
• Installation is done in just a few minutes
• Built in eject button, 360/PC switch, HDD/PC switch.
• High quality Sata Ports
• Can transfer all data from the Xbox360 HD to your PC
• Superior quality design.of casemodding accessories.
• LED version will be available for crystal, smoke colors of Xeno Top Gear
• Comes with 360 opening tool for opening the console
• No need for external power supply, Xeno Top Gear is fully powered by the
  console.

Prepare to reach new highs with the just-released WiiD Mod Chip for Nintendo Wii. The WiiD Mod Chip is a fully featured Nintendo Wii Mod which is easy to install, easy to upgrade and compatible with every single Wii console system. Ideal for Wii advanced users. Additional features to be added in future with software upgrades.

Quote:

• Non Swap/Direct Boot for Wii backups
• Non Swap/Direct Boot for GC backups
• Non Swap/Direct Boot for Homebrew in GC mode
• Non Swap/Direct Boot for NTSC region Wii games/backups on US and JAP consoles
• Boots PAL Backups/Originals on NTSC WII consoles (partially without swapping)
• Boots NTSC Backups/Originals on PAL WII consoles (partially without swapping)
• Boots different region GC Games Original/Backups Imports (partially without swapping)
• EUROPE/USA/JAPAN Wii Console Supported
• Double soldering option, 6 wires or Quicksolder (No wires Required)
• Compatible with all the WII Console Versions/Drive currently available
• Full D2B Drive Support
• Built-in audio fix
• Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
• Supports Multi-Disc/Multigames games for BOTH Wii and Gamecube
• Recovery Mode for incomplete/Bad Upgrades
• Stealth mode
• Firmware fully Upgradable by DVD

The ultimate Nintendo DS Lite backup system just got a whole lot more affordable. The DS-Xtreme 4Gb NDS Backup Unit has been reduced by $25 to only $99.99. Order today while supplies last. Remember that the DS-Xtreme 4Gb includes everything you need to get up and running, no external memory is required at all and it comes complete with great software.

Zoozen has just updated their indispensable console tool kit to now include opening tools for the PlayStation 3 and the Nintendo Wii. The Zoozen PR v2 Opening Tools are now in stock at ConsoleSource.com.

Quote:

If you have ever attempted any repair or improvement of any kind, you know that the right tools can make the difference between a good experience and a bad one. The Access Pro Toolkit by Zoozen has everything you need to get into your console and accessories. It is the only toolkit that includes tools for every console and handheld on the market today. And it includes unique and custom tools that are only available from Zoozen.

• 1pc Easy grip screwdriver handle
• 1pc Magnetic Tweezers
• 1pc “OneSnap” tool for opening Xbox 360
• 1pc Linehead nut setter (small size)
• 1pc Linehead nut setter (large size)
• 1pc Flathead bit, Long
• 2pcs Torx Size 6, Tamper Resistant
• 2pcs Torx Size 8, Tamper Resistant
• 2pcs Torx Size 10, Tamper Resistant
• 2pcs Torx Size 15, Tamper Resistant
• 2pcs Torx Size 20, Tamper Resistant
• 2pcs Hex Size .05
• 2pcs Triwing Bit
• 2pcs Phillips #000
• 2pcs Phillips #0
• 2pcs Phillips #1
• 2pcs Slotted 7/64

We received another shipment of WiiKeys yesterday afternoon and have managed to ship nearly all remaining pre-orders today. Any remaining pre-orders will be shipped on Monday March 12, 2007.

We also received enough stock in this shipment to make the WiiKey a regular stock item. Yes, that is right the elusive WiiKey is in stock at ConsoleSource.com

ORDER NOW - $39.95

We have finally secured a stock of DMS4 EZI S.E. replacement parts and made them available for purchase for $19.99. The replacement parts kit is compatible with both the DMS4 EZI S.E. Lite and PRO Mod Chips and include the following:

• 1 X BIOS clip
• 1 x DSP clip
• 4 x FFC cable for interconnection of BIOS, DSP, LED test panel and Eject
• 1 x Eject assembly (V5-V8)
• 1 x Eject assembly (V9-V11)
• 1 x Eject assembly (V12-V15)

Team Xecuter has announced new details surrounding the Xecuter team’s first PS3 modification known as the PS3 HDXT Hard Drive Xtender and HDXT SATA to IDE Converter. The Xecuter PS3 HDXT is a caddy type frame that plugs into the PS3 internally where the 2.5″ SATA drive would normally slot. You then clip on the matching faceplate and bingo you now have a clean external SATA connection. No frills and no fuss. You can now add any hard drive you wish and connect it any way you wish.

You can pre-order the Xecuter PS3 HDXT and optional HDXT SATA to IDE Converter today at ConsoleSource.com.

Quote:

We announced the PS3 Hyperdrive project a few weeks ago and listened to a lot of criticism regarding the design. So we looked at it again.

We had to ask ourselves what was the main purpose of this product.

1. To be able to add any SATA or IDE Hard Drive externally to the PS3 - so there was no need for any expensive 2.5″ Sata Hard Drive upgrades if the need for a very large hard drive was required in the near future.
2. To make the adapter a clean design and pleasing to the eye.
3. To be simple and cheap.

So we went back to the drawing board and after a couple of weeks of tweaking we have finished the design and have already gone into production of the PS3 HDXT.

It’s simple, clean, cheap and it works.

The Xecuter PS3 HDXT is a caddy type frame that plugs into the PS3 internally where the 2.5″ Sata drive would normally slot. You then clip on the matching faceplate and bingo you now have a clean external Sata connection. No frills and no fuss. You can now add any hard drive you wish and connect it any way you wish. We have also designed a simple but cost effective Sata to IDE convertor.

Source: Team Xecuter

The WiiKey Setup disc ISOs have been added to the helpdesk for download.

Quote:

We’ve uploaded a setup disc version which will automatically turn the region free mode on (for those who don’t have a GC controller handy). We will upload another setup disc version which will allow cycling and selecting the menu options with the Wii’s RESET button later on this week. Meanwhile we are working on additinal features and improvements for wiikey and the configuration menu.

Source: Wiikey.cn