ConsoleSource.com Blog

The Wiikey fusion is a brand new mod chip for Nintendo Wii by the Wiikey Team. This revolutionary mod chip will allow you to play your backup ISOs from any SD card or DVD.

The Wiikey Fusion, like all cable based modchips used a security flaw in the DVD Drive to get backups to run. The flaw was an audio debug line, that Nintendo left open. In the latest d3-2 drives that started appearing in Wiis in Europe and North America at the start of August 2009. If your DVD drive is a D3 version 2 it will not be able to play backups in disc format, but will be able to run ISOs from SD cards!

The reason we have added a tick for “any future DVD drives” is because the Wiikey Fusion is a total DVD drive emulator. In fact, you can actually take your DVD drive out if you want, and just load games from the SD card?

Order the WiiKey Fusion Mod Chip for as low as $44.95.

Wii Region Compatibility
The Wiikey Fusion works on every single region (PAL, NTSC-u, NTSC-j and KOREAN). There is a little region selector (dipswitch) on the modchip. Before installing the product you flick a switch for your region and plug in the modchip!

Wii Game Compatibility
Like all modchips from the Wiikey team, the Wiikey fusion will work with every single games from your region. There are no patches needed, no fixes to ISO, the modchip can boot any game without errors. You plug it in, and forget about it :)

Cross region compatibility is a little bit different. The Wiikey Fusion will allow 50~80% of games to work from other regions (backup or original). The % changes from 1 region to another, and is the same as any other modchip from the team.

The product will also allow Gamecube backups, and Gamecube games from other regions to work.

SD Card Slot ISO Loading, how does it work?
To be sure the Wiikey Fusion is 100% solderless, it comes with a SD card slot that you can use (you can route it to be an external slot hanging out the back of your wii). If you have a soldering Iron handy you will need to solder just 2 wires from the Wiikey Fusion to the SD Card slot on the wii if you would like to use the Wii’s own Sd card slot.

As we mentioned, its option to solder the wires, if you want to have it 100% solderless, you can still enjoy all of the features.

Anything that works through DVD, will load through the SD card slot in ISO format, including gamecube ISOs!

Wiikey Fusion Installation
Its very easy, just like the Drivekey! Open wii, disconnect the ribbon cable, plug in modchip, connect ribbon cable to modchip, close wii! The product is a fusion of the Drivekey product, and a SD card ISO loader (which is a worlds first)

The all new iEDGE offers support for NDS, NDS Lite, and the new DSi. More importantly the iEDGE supports firmware flashing to protect your investment against any future DSi system updates

Order the iEDGE for as low as $24.95.

• Supports DSi/DSL/DS
• Fully upgrade-able bootstrap to combat future DSi firmware updates
• Supports DSi firmware v1.4+
• Plays commercial NDS ROM
• Plays homebrew NDS ROMS
• Frequently updated OS for best compatibility In game reset
• Automatic ROM protection patcher
• SlowMotion mode
• Save game saves directly to Micro SD
• Automatic save game type detection
• Supports clean ROMs
• Supports MicroSDHC cards up to 32GB
• Multimedia playback such as movies and MP3’s
• Action Replay compatible cheat system
• Multi language user interface
• Micro SDHC card reader included
• Full download play support

The Xecuter 360 Blaster CK3 is the latest revision from Team Xecuter and replaced the previous model the Blaster 360 NE, they have now added Lite-On v1 & v2 support and the kit has a probe to use on Lite-On v1 drives to obtain the key without any soldering. The Blaster CK3 comes with a Hitachi PCB Fix is an external switching device when, once fitted, allows you to flash your DVD Firmware without ever having to open up your Xbox 360 case ever again. In the era of constant firmware updates with over 40+ so far, the Xecuter 360 Blaster CK3 is an absolutely essential tool saving both time and effort, by making the firmware update process a walk in the park.

Another incredibly cool function is being able to dump your game backups to your PC using Xecuter 360 Blaster CK3, this is now a fast and simple process, as most of you know a Kreon drive can cost nearly as much as the Blaster CK3 alone, so buying a blaster is a great way to keep your drives firmware up to date, and if you want to make backups of your original games this can be done with the drive in your console rather than having to get a Kreon drive as well. A perfect ergonomic design for the 360 Blaster CK3 means there is no soldering and no cutting of the external case – just plug her in and off you go. You only ever have to open up your case once! No longer will you have to have your console in pieces all the time, and no longer will you have to take the console apart every time you need to update new features and functions or essential bug fixes, no longer do you have to have your Console in bits every time you want to dump a game backup to your PC. The 360 Blaster CK3 is an essential tool for those who wish to go down the firmware path rather than chipping.

Order the Xecuter Blaster CK3 from ConsoleSource.com for as low as $59.95.

• Once installed never open up the case again to update firmware
• Extensively tested on ALL Hitachi and Samsung (inc Hitachi 46 and 47)
• High Quality Digital Sata Exchange Switching
• No soldering, nor any cutting of the Xbox 360 case or shell is required
• 5 minute install
• Modeb switch for Hitachi
• Eject Button
• High quality Sata Port (to connect to SATA or X360USB externally)
• Samsung MS28 / Power On-Off Switch
• Superior quality design – no cheap China manufacturing
• Ergonomically matched to the 360 case
• Colour co-ordinated cables making installation a snap
• LED Glow feature
• LED Glow Off / Led Perm On / LED Off switch
• Streamlined internal design
• No need for a separate PSU – saving you more money and time
• Includes free T10 screwdriver & 360 Case Unlocking Tool