Is your stock Xbox 360 looking played out? With the all new Ghost Case Black kit you can easily add that custom look to your Xbox 360 complete with blue LED lighting. This is the most complete 360 case on the market. The Black Ghost Case Ultra v2 w/ Smart LED Kit is available now from ConsoleSource.com for $59.95.

The Wiikey fusion is a brand new mod chip for Nintendo Wii by the Wiikey Team. This revolutionary mod chip will allow you to play your backup ISOs from any SD card or DVD.

The Wiikey Fusion, like all cable based modchips used a security flaw in the DVD Drive to get backups to run. The flaw was an audio debug line, that Nintendo left open. In the latest d3-2 drives that started appearing in Wiis in Europe and North America at the start of August 2009. If your DVD drive is a D3 version 2 it will not be able to play backups in disc format, but will be able to run ISOs from SD cards!

The reason we have added a tick for “any future DVD drives” is because the Wiikey Fusion is a total DVD drive emulator. In fact, you can actually take your DVD drive out if you want, and just load games from the SD card?

Order the WiiKey Fusion Mod Chip for as low as $44.95.

Wii Region Compatibility
The Wiikey Fusion works on every single region (PAL, NTSC-u, NTSC-j and KOREAN). There is a little region selector (dipswitch) on the modchip. Before installing the product you flick a switch for your region and plug in the modchip!

Wii Game Compatibility
Like all modchips from the Wiikey team, the Wiikey fusion will work with every single games from your region. There are no patches needed, no fixes to ISO, the modchip can boot any game without errors. You plug it in, and forget about it :)

Cross region compatibility is a little bit different. The Wiikey Fusion will allow 50~80% of games to work from other regions (backup or original). The % changes from 1 region to another, and is the same as any other modchip from the team.

The product will also allow Gamecube backups, and Gamecube games from other regions to work.

SD Card Slot ISO Loading, how does it work?
To be sure the Wiikey Fusion is 100% solderless, it comes with a SD card slot that you can use (you can route it to be an external slot hanging out the back of your wii). If you have a soldering Iron handy you will need to solder just 2 wires from the Wiikey Fusion to the SD Card slot on the wii if you would like to use the Wii’s own Sd card slot.

As we mentioned, its option to solder the wires, if you want to have it 100% solderless, you can still enjoy all of the features.

Anything that works through DVD, will load through the SD card slot in ISO format, including gamecube ISOs!

Wiikey Fusion Installation
Its very easy, just like the Drivekey! Open wii, disconnect the ribbon cable, plug in modchip, connect ribbon cable to modchip, close wii! The product is a fusion of the Drivekey product, and a SD card ISO loader (which is a worlds first)

The all new iEDGE offers support for NDS, NDS Lite, and the new DSi. More importantly the iEDGE supports firmware flashing to protect your investment against any future DSi system updates

Order the iEDGE for as low as $24.95.

• Supports DSi/DSL/DS
• Fully upgrade-able bootstrap to combat future DSi firmware updates
• Supports DSi firmware v1.4+
• Plays commercial NDS ROM
• Plays homebrew NDS ROMS
• Frequently updated OS for best compatibility In game reset
• Automatic ROM protection patcher
• SlowMotion mode
• Save game saves directly to Micro SD
• Automatic save game type detection
• Supports clean ROMs
• Supports MicroSDHC cards up to 32GB
• Multimedia playback such as movies and MP3’s
• Action Replay compatible cheat system
• Multi language user interface
• Micro SDHC card reader included
• Full download play support

The Xecuter 360 Blaster CK3 is the latest revision from Team Xecuter and replaced the previous model the Blaster 360 NE, they have now added Lite-On v1 & v2 support and the kit has a probe to use on Lite-On v1 drives to obtain the key without any soldering. The Blaster CK3 comes with a Hitachi PCB Fix is an external switching device when, once fitted, allows you to flash your DVD Firmware without ever having to open up your Xbox 360 case ever again. In the era of constant firmware updates with over 40+ so far, the Xecuter 360 Blaster CK3 is an absolutely essential tool saving both time and effort, by making the firmware update process a walk in the park.

Another incredibly cool function is being able to dump your game backups to your PC using Xecuter 360 Blaster CK3, this is now a fast and simple process, as most of you know a Kreon drive can cost nearly as much as the Blaster CK3 alone, so buying a blaster is a great way to keep your drives firmware up to date, and if you want to make backups of your original games this can be done with the drive in your console rather than having to get a Kreon drive as well. A perfect ergonomic design for the 360 Blaster CK3 means there is no soldering and no cutting of the external case – just plug her in and off you go. You only ever have to open up your case once! No longer will you have to have your console in pieces all the time, and no longer will you have to take the console apart every time you need to update new features and functions or essential bug fixes, no longer do you have to have your Console in bits every time you want to dump a game backup to your PC. The 360 Blaster CK3 is an essential tool for those who wish to go down the firmware path rather than chipping.

Order the Xecuter Blaster CK3 from ConsoleSource.com for as low as $59.95.

• Once installed never open up the case again to update firmware
• Extensively tested on ALL Hitachi and Samsung (inc Hitachi 46 and 47)
• High Quality Digital Sata Exchange Switching
• No soldering, nor any cutting of the Xbox 360 case or shell is required
• 5 minute install
• Modeb switch for Hitachi
• Eject Button
• High quality Sata Port (to connect to SATA or X360USB externally)
• Samsung MS28 / Power On-Off Switch
• Superior quality design – no cheap China manufacturing
• Ergonomically matched to the 360 case
• Colour co-ordinated cables making installation a snap
• LED Glow feature
• LED Glow Off / Led Perm On / LED Off switch
• Streamlined internal design
• No need for a separate PSU – saving you more money and time
• Includes free T10 screwdriver & 360 Case Unlocking Tool

Available now from ConsoleSource.com the IntensaFIRE brings programable rapid fire carnage to Xbox 360. All this in an easy to install package that requires no soldering and no wires. Order today for only $29.95.

The IntensaFIRE modifies XBOX 360 controllers (CG, Matrix and wireless), allowing them to control 5-mode sleeper settings, and use customizable user programmable modes. It uses the existing Sync button to toggle and also offers and included button that advanced modifiers can use. It also enables dual rapid-fire- usable in all XBOX 360 games, including gamer favorites: Left 4 Dead, the Call of Duty series, the Halo series, 
the Gears of War series, and Street Fighter.

5-mode sleeper mod kits exist. Dual rapid-fire mod kits exist. The IntensaFIRE mod kit has both. There are controllers on the market, prefabricated, that do what the IntensaFIRE offers, each controller going for well over $100. We offer a mod kit that is extremely simple to install, taking no more than 3 minutes with minimal tools for less than 1/4th the cost of the prefabricated units. Other mod kits require drilling, wiring, gluing, and deconstruction of your controllers. The IntensaFIRE only needs a few existing points to solder to connect the IntensaFIRE flex board to the controller and you’re ready to go!

Looking to add a completely custom look to your Xbox 360? Then the new Xbox 360 XCM Black Light Case w/HDMI is exactly what you are looking for. This high quality case includes a pre-cut window, smooth black finish and integrated, selectable blue, green, orange, purple, red, yelow and green LED lights.

The Xbox 360 XCM Black Light Case w/HDMI is available from ConsoleSource.com for $79.95.

Now you can fully customize the appearance of your Xbox 360 BenQ / Philips DVD-ROM drive with the new XCM B.Q. Cover. Using this DVD cover with an Xbox 360 crystal case, you can see through the DVD rom and actually what the game discs, how does it spin, loading etc. The XCM B.Q. Cover For BenQ / Philips DVD-ROM is available from ConsoleSource.com for only $16.95.

As a consumer of digital media and electronics you stand to be greatly impacted by changes to Canada’s copyright regime. Fortunately, the Government wants to hear from consumers and creators alike so that the interests of all Canadians can be taken into account. Until September 13, 2009 you can participate in the recently launched government consultations on copyright by visiting www.copyrightconsultation.ca and registering for an upcoming townhall meeting, webcast or by making a submission via email.

If we do not voice our concerns en masse we run the risk of having a draconian system of copyright rules imposed upon us. Imagine living in a country where corporations dictate how you consume information and media and utilize technology. Canadians need to speak out against such proposals and push for greater flexibility in the law to provide a balanced, fair approach on digital reforms. To that end, Michael Geist has just launched www.speakoutoncopyright.ca. The site is designed to inform and help foster greater participation by bringing together online discussion (ie. the Twitter #copycon stream), postings, videos, news reports, etc.

The Canadian Coalition for Electronic Rights has also updated its letter wizard allowing you to easily submit your concerns in both official languages directly to the government copyright consultations as well as those minsters responsible for modernizing Canada’s Copyright Act.

The all new M3i Zero offers support for NDS, NDS Lite, and the new DSi. More importantly the M3i Zero supports firmware flashing to protect your investment against any future DSi system updates. Another great benefit to the M3i Zero is the fact it comes with M3 in house media player. This media player just like the main menu interface is extremely pleasing to the eye and easy to navigate, you will be able to play your DPG videos and MP3’s with ease.

There is also a couple of other added software features that come with the Sakura O/S that runs on the M3i Zero including a PDA style organizer which has a date calendar, calculator and more. The M3i Zero is also backwards compatible, so if you are currently the owner of an older DS or DS Lite and wish to have a flash card to use now, but also know you will be upgrading to a DSi in the near future, the M3i Zero will work just fine in your older DS or DS Lite until you make the upgrade to the DSi console, this way you don’t have to buy a new flash card when you do upgrade to the DSi.

The M3i Zero Sakura is available now from ConsoleSource.com for as low as $34.95.

Features:

• Advanced Sakura Operating System & GUI
• USB 2.0 MicroSD & SDHC Reader Included
• Compatible With All Speeds of MicroSD
• High Quality Shell Casing & Hardware
• Excellent Homebrew Compatibility
• Hardware Updatable Kernel Sys
• Custom Media Centre Soft
• Supports MicroSD & MicroSDHC to 32GB
• Real Time Save & Soft Reset Functions
• Supports DS, DS Lite & DSi Consoles
• Built in PDA With Notepad & More
• Easy Touch Screen Navigation
• Multi Skin Interface Support
• Multi-Language Support

iPlayer is a media player card for Nintendo DSi and DS Lite which is built around a high-performance video decoder chip which allows realtime video decoding at the hardware level. The iPlayer is capable of playing the most common video formats including AVI, RMVB, MOV, DIVX, MPEG, FLV, 3GP, ASF OR WMV on your Nintendo DSi and DS Lite without any awkward conversion process.

Just copy your media files onto a MicroSD card ranging in capacity from 2GB up to 16GB, insert the MicroSD into the iPlayer and then insert the iPlayer into your DSi or DS Lite and enjoy!

Order the iPlayer for Nintendo DSi and DS Lite today from ConsoleSource.com.