 
ConsoleSource.com is an official WiiKey Fusion reseller
FREE LIMITED TIME OFFER
All Nintendo Wii Mod Chips come with a FREE tri-wing screwdriver which normally sells for $9.95 on its own.
To take advantage of this offer simply proceed to checkout with 1 or more of the qualifying Wii Mod Chips in your cart and your FREE Tri-Wing Screwdriver will be added at the time of shipping (DO NOT ADD the Tri-Wing Screwdriver to your cart). Limit 1 free Tri-Wing Screwdriver per order. ConsoleSource.com reserves the right to modify or cancel this offer at any time.
The Wiikey fusion is a brand new device for Nintendo Wii by the Wiikey Team. This revolutionary chip will allow you to play your homebrews from any SD card or DVD.
The Wiikey Fusion does not play homebrews from DVD if your drive is a D3 version 2 but it will run homebrews from SD cards!
The reason we have added a tick for "any future DVD drives" is because the Wiikey Fusion is a total DVD drive emulator. In fact, you can actually take your DVD drive out if you want, and just load homebrews from the SD card?
Wii Region Compatibility
The Wiikey Fusion works on every single region (PAL, NTSC-u, NTSC-j and KOREAN). There is a little region selector (dipswitch) on the device. Before installing the product you flick a switch for your region and plug in the modchip!
Wii Homebrew Compatibility
Like all modchips from the Wiikey team, the Wiikey fusion will work with every single homebrew from your region. There are no patches needed, no fixes to homebrews, the modchip can boot any homebrew without errors. You plug it in, and forget about it :)
Cross region compatibility is a little bit different. The Wiikey Fusion will allow 50~80% of homebrews to work from other regions (originals). The % changes from 1 region to another, and is the same as any other device from the team.
The product will also allow Gamecube homebrews from other regions to work.
SD Card Slot Homebrew Loading, how does it work?
To be sure the Wiikey Fusion is 100% solderless, it comes with a SD card slot that you can use (you can route it to be an external slot hanging out the back of your wii). If you have a soldering Iron handy you will need to solder just 2 wires from the Wiikey Fusion to the SD Card slot on the wii if you would like to use the Wii's own Sd card slot.
As we mentioned, its option to solder the wires, if you want to have it 100% solderless, you can still enjoy all of the features.
Any homebrew that works through DVD, will load through the SD card slot in homebrew format, including gamecube homebrews!
Wiikey Fusion Installation
Its very easy, just like the Drivekey! Open wii, disconnect the ribbon cable, plug in modchip, connect ribbon cable to modchip, close wii! The product is a fusion of the Drivekey product, and a SD card homebrew loader (which is a worlds first)
|
